Simpson Strong-Tie HW Series 2-1/2 x 7-1/2 x 9-1/8 7 ga Top

Simpson Strong-Tie HW Series 2-1/2 x 7-1/2 x 9-1/8 7 ga Top

Heavy duty hangers designed to be installed on a masonry and concrete walls. These hangers are heavy-duty face-mount joist hangers made from galvanized steel.

Simpson Strong-Tie 1.25-in x 3.25-in 18-Gauge G90 Galvanized Steel

With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle.

Simpson Strong-Tie mit Galvanized Top-Flange Joist Hanger for 2-1/2 in. x 11-7/8 in. Engineered Wood | MIT311.88

Simpson Strong-Tie 15-1/8-in 7-Gauge Steel Holddown Wood To

Simpson Strong-Tie ITS Galvanized Top-Flange Joist Hanger for 2-1

Strong-Drive® SDS HEAVY-DUTY CONNECTOR Screw

Simpson Strong-Tie LUS Galvanized Face-Mount Joist Hanger for 2x10

Simpson Strong-Tie 1.548-in x 1.375-in x 2.048-in 18-Gauge

Simpson Strong-Tie 1-7/16 in. x 2-1/2in. Stainless-Steel Framing

Simpson Strong-Tie LUS Galvanized Face-Mount Joist Hanger for 2x10

Simpson Strong-Tie ITS2.56/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.56/9.5 installs 2-1/2 or 2-9/16 x 9-1/2 I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost.

Simpson Strong-Tie Its2.56/14 Top Flange I-Joist Hanger