Simpson Strong-Tie HGLTV3.514 3-1/2 x 14 Top Flange I-Joist Hanger

Simpson Strong-Tie HGLTV3.514 3-1/2 x 14 Top Flange I-Joist Hanger

Simpson HGLTV hangers are designed for use with structural composite lumber header applications that require high loads. The top flange nails are sized and specifically located to prevent degradation of the header due to splitting of laminations. The Strong-Tie HGLTV top flange hanger features a Gray Paint finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

Simpson HGLTV hangers are designed for use with structural composite lumber header applications that require high loads. The top flange nails are sized and specifically located to prevent degradation of the header due to splitting of laminations. The Strong-Tie HGLTV top flange hanger features a Gray Paint finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

Simpson Strong-Tie HGLTV3.514 3-1/2 x 14 Top Flange I-Joist Hanger

Simpson Strong-Tie HGLTV3.514 Top Flange I-Joist Hanger 1/2 x 14 **SALE**

Finished in Simpson Strong-Tie gray paint Top flange-3 gauge; Stirrups-7 gauge HGLTV hangers should not be attached to nailer's This series may be

Simpson Strong Tie HGLTV3.514 Heavy Duty Hanger

Simpson Strong-Tie Single 1-3/4-in x 11-7/8-in 14-Gauge G90

CSG-INTLBEAM12 - Simpson Strong-Tie

ESR-2615 FL10667 Continued on page 2 - Simpson Strong-Tie

The MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD screw anchor and Strong-Drive SDS Heavy-Duty Connector screws are included with the hanger.

Simpson Strong-Tie MBHU3.56/11.25KT Masonry Beam Hanger Kit

Mackenzie Milne

Simpson Strong-Tie HGLTV3.514 Top Flange I-Joist Hanger 1/2 x 14

Simpson HGLTV hangers are designed for use with structural composite lumber header applications that require high loads. The top flange nails are sized and specifically located to prevent degradation of the header due to splitting of laminations. The Strong-Tie HGLTV top flange hanger features a Gray Paint finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

Simpson Strong-Tie HGLTV3.514 3-1/2 x 14 Top Flange I-Joist Hanger

Simpson Strong-Tie connectors make projects easier to build while making them stronger and safer. They are engineered and tested to perform and are manufactured to the highest quality standards. Whether working on a home project or building a structure to comply with building codes, go with the choice of engineers and contractors, go with genuine Simpson Strong-Tie connectors.

Simpson Strong Tie HU14 14-Gauge Face Mount Joist Hanger

ITS3.56/16 - Truss Joist Size: 3-1/2 x 16 Simpson Strong-Tie ITS3.56/16 sets a new standard for engineered wood top flange hangers. The ITS3.56/16 installs 3-1/2 x 16 I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8 to 1 1/2 .

Simpson Strong-Tie ITS3.56/14 Top Flange I-Joist Hanger

Simpson Strong-Tie BA1.81/9.25 Top Flange Joist Hanger