MBus_WTH_LCD_ETH: ModbusTCP / ModbusRTU Wall Temp/Humidity Sensor w/ L – DataNab LLC

July 08,2024

Part #: MBus_WTH_LCD_ETH This Modbus-TCP and Modbus-RTU enabled temperature & humidity sensor is designed to be mounted on a wall or a surface. It has a backlit LCD display and can communicate with a supervisory control system on an Ethernet TCP/IP network using the Modbus-TCP protocol and/or on an RS485 network using the Modbus-RTU protocol. The sensor also has two 0-5V / 0-10V / 4-20mA analog outputs that can provide a signal equivalent to the current temperature & humidity values. This enables the sensor to be read by simple analog inputs and/or allows the sensor to be used as a dual transducer to directly control two actuators or valves based on temperature or humidity.

Modbus 温湿度传感器+ 4路继电器+ DTU 透传接入ThingsCloud-CSDN博客

How to Publish DHT11 Sensor Data from NodeMCU to Modbus TCP Server and Read it in Ignition SCADA

Part #: MBus_WTH_LCD_ETH_EXT This Modbus-TCP and Modbus-RTU enabled temperature & humidity sensor is designed to be mounted on a wall or a surface and

MBus_WTH_LCD_ETH_EXT: ModbusTCP / ModbusRTU Wall Temp/Humidity Sensor with LCD, 2 analog outputs, and 2m cable extension

LED Temperature Humidity Sensor Digit Display RS4 85 Modbus RTU Humidity Temperature Sensor External Sensor : Appliances

Sn Th Sensor Modular Temperature Humidity

NT28B16 RS485 Temperature Collector Modbus RTU Paperless Recorder 10K/20K/50K/100K B3950 NTC Sensor

MBus_io12_LCD: Fully Programmable Modbus I/O device with LCD Display – DataNab LLC