Knife Sharpening Guide Clip – SharpEdge

Knife Sharpening Guide Clip – SharpEdge

The Sharpening Guide Clip (or Angle) helps to maintain the same sharpening angle while sharpening your knife, as seen on the product pictures. The purpose of the soft plastic on the inner side of the clip is to prevent the blade from getting damaged, while a special ceramic cover enables smooth sliding on the whetstone without damaging it..
The Sharpening Guide Clip (or Angle) helps to maintain the same sharpening angle while sharpening your knife, as seen on the product pictures (with the ZDP-189 Santoku Black knife). The purpose of the soft plastic on the inner side of the clip is to prevent the blade from getting damaged, while a special ceramic cover enables smooth sliding on the whetstone without damaging it.This guide clip is suitable for blades of 3.5-5cm (1.4"-2.0") of width. For such blades, a clip will hold an edge of approximately 16°, an angle at which Japanese knives should be sharpened.Guide clip can also be used on non-Japanese knives, but the edge will be a bit more sensitive since knives from softer steels (like German/French knives, <60 HRC) should be sharpened at a slightly wider angle (around 20°)..

The Sharpening Guide Clip (or Angle) helps to maintain the same sharpening angle while sharpening your knife, as seen on the product pictures (with the ZDP-189 Santoku Black knife). The purpose of the soft plastic on the inner side of the clip is to prevent the blade from getting damaged, while a special ceramic cover enables smooth sliding on the whetstone without damaging it.

This guide clip is suitable for blades of 3.5-5cm (1.4-2.0) of width. For such blades, a clip will hold an edge of approximately 16°, an angle at which Japanese knives should be sharpened.

Guide clip can also be used on non-Japanese knives, but the edge will be a bit more sensitive since knives from softer steels (like German/French knives, <60 HRC) should be sharpened at a slightly wider angle (around 20°).

.
The Sharpening Guide Clip (or Angle) helps to maintain the same sharpening angle while sharpening your knife, as seen on the product pictures (with the ZDP-189 Santoku Black knife). The purpose of the soft plastic on the inner side of the clip is to prevent the blade from getting damaged, while a special ceramic cover enables smooth sliding on the whetstone without damaging it. This guide clip is suitable for blades of 3.5-5cm (1.4-2.0) of width. For such blades, a clip will hold an edge of approximately 16°, an angle at which Japanese knives should be sharpened. Guide clip can also be used on non-Japanese knives, but the edge will be a bit more sensitive since knives from softer steels (like German/French knives, <60 HRC) should be sharpened at a slightly wider angle (around 20°).

Edge Pro Sharpening Guide Clips, 3-Pack - KnifeCenter - GC

Galbert Drawsharp Drawknife Sharpening Guide - Lee Valley Tools

Try this sharpening trick to get the perfect knife edge with the Tumbler Sharpener #knofesharpening

How to Set the Angle on your Edge Pro Knife Sharpening System

Razor Edge System - Knife Sharpening Guide

Sharpie trick for finding the perfect sharpening angle with Tumbler Rolling Sharpener

Specifications

Fast Precise Knife Sharpening Guide Clip For Whetstone Sharpener Kitchen Tool - Black

20 degree sharpening guide for slicing knife

Edge Pro Sharpening Guide Clips, 3-Pack - KnifeCenter - GC

Sharpening Guide Review