Water, Beer and Wort Chiller for home brewing systems

Water, Beer and Wort Chiller for home brewing systems

This exceptional 120V (3/8hp) water chiller (the Lindr AS110) regulate fermentation temperature by pumping cold water to lower wort temperature.
These exceptional water chillers can regulate fermentation temperature by pumping cold water through the jacket of the 3-in-1 (or 4-in-1), lower wort temperature post-boil when warm municipal water can't finish the job, AND the 3000BTU Chiller can chill beer in-line from keg to tap. A few of their many features include: designed for professional beverage cooling in restaurants, bars and the catering industry powerful circulation pump with a displacement of 26' / 8m minimum energy usage 45% more efficient than its power input cooling coils made from stainless steel  materials meet the highest requirements for hygiene standards and long working life adjustable temperature control with 7 different settings (4°C/39°F-10°C/50°F) dimensions L 17/42cm x W 24/61cm x H 19/48cm (3000BTU) (H 21/53cm for 6500BTU) Tap water or another chilling water source should be used for removing the large heat load post boil and this chiller used for maintaining fermentation temperature. Since this is a water chiller, it is not designed to crash cool near or below freezing temperatures but can get beer down within a few degrees of freezing if not fighting large ambient heat loads. Replacement parts can be purchased here. The chiller utility cart is a sturdy (226kg/500lb) cart that allows you to easily move your water chiller around your brew space. It also comes with two additional shelves and removable side rails that provide a convenient space to store fittings and hoses. The 'Hoses connecting water chiller to fermenter jacket' include two 8' lengths of 1/2 high-temp braided silicone hose and three 1.5 tri-clamp by 1/2 hose barbs, one 3/8 hose barb to insert in the pump hose (to connect the silicone hose) and with the 6500BTU chiller an IEC to 5-15 power cord adapter to plug the circulation pump into the ETC. This will enable you to easily connect your chiller pump to a fermenter jacket (and from jacket back to chiller reservoir) for circulating cooling water through the fermenter to maintain fermentation temperature. BREWinfo: Water Chiller Instruction Manual (pg 36)BREWinfo: Water Chillers specification sheetBREWinfo: Installing a portable fermenting temp controllerVideo: Overview of the Water, Beer and Wort ChillerBREWinfo: Maintaining temperature during fermentationBREWinfo: Removing a shark bite connector 

News Tagged all in one beer brewing system - - Bräu Supply

50 Plates brazed plate heat exchanger Beer Wort Chiller Cooler Home Brewing Beer Brazed plate type water heater SUS304 - AliExpress

Grainfather S40 Brewing System - Beer Wine Hobby Store View

The Best Wort Chiller on – Robb Report

About This Product 9.2 Gal/35 L Brewing Pot: Our all-in-one brewing system makes it simple for homebrewers to step up to all-grain brewing without a mountain of equipment and costs. The 9.2 Gal pot can brew up to 8 Gal of high-quality beer. The inner pot in contact with food is constructed of 0.02-inch-thick 304 stainless steel, handling nothing but grains. It is sure to stand up to the heavy-duty use and perfect your beer recipes.

VEVOR Electric Brewing System, 9.2 Gal/35 L Brewing Pot, All-in-One Home Beer Brewer w/Pump, Mash Boil Device w/Panel, Auto/Manual Mode 100-1800W

Clover Wort Immersion Chiller – 1 Gallon

Grainfather G30 Brewing System (110V) – What's Brewing? Supply

Immersion Wort Chiller (Efficient) - 25 ft. x 3/8 in.

Wort Chiller Stout Tanks & Kettles Brewing Equipment

Stainless Steel Wort Chiller Coil Home Brewing Beer Immersion USA